workspace-v1/projects/gamilit/docs/01-fase-alcance-inicial/EAI-008-portal-admin/05-otros-componentes/MANUAL-TESTING-GUIDE-ADMIN-SETTINGS.md

Manual Testing Guide: AdminSettingsPage

Version: 1.0.0 Date: 2025-11-24 Component: AdminSettingsPage Configuration Tabs

---

Prerequisites

1. Backend running on http://localhost:3006
2. Frontend running on http://localhost:5173 (or configured port)
3. Admin user authenticated
4. Database initialized with system_settings table

---

Test Scenarios

1. Navigation & Initial Load

Steps:

1. Login as admin user
2. Navigate to /admin/settings or click "Settings" in admin portal

Expected Results:

• ✅ Page loads without errors
• ✅ "System Configuration" header visible
• ✅ Two tabs visible: "General" and "Security"
• ✅ "General" tab selected by default
• ✅ Yellow warning banner at bottom
• ✅ Loading spinner shown briefly while fetching config

Validation:

Console: No errors
Network: GET /admin/system/config/general (200 OK)
UI: General settings form displayed

---

2. General Settings Tab

2A. Load Current Settings

Steps:

1. Click on "General" tab (if not already selected)
2. Wait for form to load

Expected Results:

• ✅ Form displays with 3 fields
• ✅ "Allow User Registrations" checkbox shows current value
• ✅ "Maintenance Mode" checkbox shows current value
• ✅ "Maintenance Message" textarea shows current message
• ✅ Save button is DISABLED (no changes yet)

2B. Toggle Allow Registrations

Steps:

1. Click "Allow User Registrations" checkbox
2. Observe Save button state

Expected Results:

• ✅ Checkbox toggles
• ✅ Save button becomes ENABLED
• ✅ Reset button becomes ENABLED

2C. Enable Maintenance Mode

Steps:

1. Click "Maintenance Mode" checkbox
2. Observe form state

Expected Results:

• ✅ Checkbox toggles
• ✅ Save button remains enabled
• ✅ Form is now dirty (has unsaved changes)

2D. Edit Maintenance Message

Steps:

1. Click in "Maintenance Message" textarea
2. Type: "System will be back at 10 PM"

Expected Results:

• ✅ Text updates in real-time
• ✅ Save button remains enabled

2E. Validate Maintenance Message (Error Case)

Steps:

1. Clear maintenance message textarea
2. Type only: "Short"
3. Click outside textarea

Expected Results:

• ✅ Red error message appears: "Message must be at least 10 characters"
• ✅ Save button remains enabled (form validation will catch on submit)

2F. Save General Settings

Steps:

1. Ensure valid values in all fields
2. Click "Save Changes" button

Expected Results:

• ✅ Button shows "Saving..." text
• ✅ Button becomes disabled
• ✅ Success toast notification appears (green): "General settings updated successfully"
• ✅ Form resets with new values
• ✅ Save button becomes disabled again

Validation:

Network: PUT /admin/system/config/general (200 OK)
Console: No errors
Database: Check system_settings table updated

2G. Reset General Settings

Steps:

1. Make a change to any field
2. Click "Reset" button

Expected Results:

• ✅ Form reverts to original values
• ✅ Save button becomes disabled
• ✅ Reset button becomes disabled

---

3. Security Settings Tab

3A. Switch to Security Tab

Steps:

1. Click "Security" tab

Expected Results:

• ✅ Tab becomes active (blue underline)
• ✅ Security form loads
• ✅ General form hidden
• ✅ Loading spinner shown briefly

Validation:

Network: GET /admin/system/config/security (200 OK)

3B. Load Security Settings

Expected Results:

• ✅ "Max Login Attempts" shows current value (default: 5)
• ✅ "Lockout Duration" shows current value (default: 30)
• ✅ "Session Timeout" shows current value (default: 60)
• ✅ Blue "Best Practices" info panel visible
• ✅ Save button is DISABLED

3C. Change Max Login Attempts (Valid)

Steps:

1. Click "Max Login Attempts" input
2. Change value to: 3
3. Observe validation

Expected Results:

• ✅ Value updates
• ✅ No error message (3 is valid)
• ✅ Save button becomes ENABLED

3D. Change Max Login Attempts (Invalid - Too Low)

Steps:

1. Clear "Max Login Attempts" input
2. Type: 2
3. Click outside input

Expected Results:

• ✅ Red error message: "Must be at least 3 attempts"
• ✅ Field border turns red
• ✅ Save button still enabled (validation will prevent submit)

3E. Change Max Login Attempts (Invalid - Too High)

Steps:

1. Clear "Max Login Attempts" input
2. Type: 15
3. Click outside input

Expected Results:

• ✅ Red error message: "Must be at most 10 attempts"
• ✅ Field border turns red

3F. Change Lockout Duration (Valid Range)

Steps:

1. Click "Lockout Duration" input
2. Change to: 15

Expected Results:

• ✅ Value updates
• ✅ No error (5-1440 is valid range)
• ✅ Save button enabled

3G. Change Session Timeout

Steps:

1. Click "Session Timeout" input
2. Change to: 120 (2 hours)

Expected Results:

• ✅ Value updates
• ✅ No error (15-1440 is valid range)

3H. Save Security Settings

Steps:

1. Ensure all fields have valid values
2. Click "Save Changes"

Expected Results:

• ✅ Button shows "Saving..."
• ✅ Button disabled during save
• ✅ Success toast: "Security settings updated successfully"
• ✅ Form resets with new values
• ✅ Save button disabled

Validation:

Network: PUT /admin/system/config/security (200 OK)
Response should contain updated values

---

4. Error Handling

4A. Backend Down

Steps:

1. Stop backend server
2. Click "General" tab
3. Wait for response

Expected Results:

• ✅ Error toast appears: "Failed to fetch system configuration"
• ✅ Form remains empty or shows previous cached data
• ✅ No app crash

4B. Save Error (Backend Returns 500)

Steps:

1. Mock backend to return 500 error
2. Make changes to form
3. Click "Save Changes"

Expected Results:

• ✅ Error toast appears: "Failed to update [category] settings"
• ✅ Form retains user's changes
• ✅ Save button re-enabled
• ✅ User can retry

4C. Network Timeout

Steps:

1. Simulate slow network (Chrome DevTools: Network throttling)
2. Click "Save Changes"

Expected Results:

• ✅ "Saving..." text shown during wait
• ✅ Either success or timeout error
• ✅ Graceful handling (no hanging state)

---

5. UI/UX Testing

5A. Tab Switching

Steps:

1. Make changes in "General" tab (don't save)
2. Click "Security" tab
3. Click "General" tab again

Expected Results:

• ✅ Unsaved changes are lost (expected behavior)
• ✅ Each tab fetches fresh data on switch
• ✅ Smooth transition animation

Note: This is expected behavior. Adding "unsaved changes" warning is Phase 2.

5B. Responsive Design

Steps:

1. Resize browser window to mobile width (<768px)
2. Check tab navigation
3. Check form layout

Expected Results:

• ✅ Tabs stack vertically or remain horizontal (depends on design)
• ✅ Form inputs take full width
• ✅ Buttons remain accessible
• ✅ Text readable without horizontal scroll

5C. Warning Banner

Steps:

1. Scroll to bottom of page
2. Read yellow warning banner

Expected Results:

• ✅ Banner clearly visible
• ✅ Warning icon present
• ✅ Text explains impact of changes
• ✅ Banner styled appropriately (yellow background)

---

6. Integration Testing

6A. Settings Persist Across Sessions

Steps:

1. Change "Max Login Attempts" to 3
2. Save changes
3. Logout
4. Login again
5. Navigate to Admin Settings > Security

Expected Results:

• ✅ "Max Login Attempts" still shows 3
• ✅ Settings persisted in database

Validation:

SELECT * FROM system_settings WHERE setting_key = 'max_login_attempts';
-- Should show: setting_value = '3'

6B. Maintenance Mode Actually Works

Steps:

1. Enable "Maintenance Mode"
2. Set message: "We'll be back soon!"
3. Save changes
4. Logout
5. Try to login as non-admin user

Expected Results:

• ✅ Non-admin users see maintenance message
• ✅ Admin users can still login
• ✅ Message matches what was set

6C. Login Attempts Enforcement

Steps:

1. Set "Max Login Attempts" to 3
2. Set "Lockout Duration" to 5 minutes
3. Save changes
4. Logout
5. Try logging in with wrong password 3 times

Expected Results:

• ✅ After 3rd failed attempt, account locked
• ✅ Error message indicates lockout
• ✅ Wait 5 minutes, can try again

---

7. Accessibility Testing

7A. Keyboard Navigation

Steps:

1. Use only Tab key to navigate form
2. Try to fill form with keyboard only

Expected Results:

• ✅ All inputs focusable with Tab
• ✅ Checkboxes toggle with Space
• ✅ Save button activatable with Enter
• ✅ Focus indicators visible

7B. Screen Reader

Steps:

1. Enable screen reader (NVDA/JAWS)
2. Navigate through form

Expected Results:

• ✅ Labels read correctly
• ✅ Input types announced
• ✅ Error messages read
• ✅ Button states announced

---

Test Data

Valid Test Values

General Settings:

allow_registrations: true
maintenance_mode: false
maintenance_message: "System maintenance in progress. Expected completion: 10 PM PST."

Security Settings:

max_login_attempts: 5
lockout_duration_minutes: 30
session_timeout_minutes: 60

Edge Case Test Values

Security - Minimum Values:

max_login_attempts: 3
lockout_duration_minutes: 5
session_timeout_minutes: 15

Security - Maximum Values:

max_login_attempts: 10
lockout_duration_minutes: 1440  (24 hours)
session_timeout_minutes: 1440  (24 hours)

---

Known Issues / Limitations

1. No Unsaved Changes Warning: Switching tabs loses unsaved changes (Phase 2)
2. Email/Notifications Tabs Missing: Backend not implemented yet
3. No Config History: Can't see previous config versions (Phase 2)
4. No Bulk Reset: Must reset form fields individually

---

Success Criteria

All tests should pass with:

• ✅ No console errors
• ✅ All network requests return 200 OK
• ✅ Toast notifications show appropriately
• ✅ Form validation works correctly
• ✅ Settings persist in database
• ✅ Maintenance mode and security policies enforced

---

Reporting Issues

If any test fails, report with:

1. Test scenario number (e.g., "3H. Save Security Settings")
2. Steps performed
3. Expected vs actual result
4. Browser console errors
5. Network tab screenshot
6. Browser/version

---

Last Updated: 2025-11-24 Tested By: [Your Name] Test Status: [ ] PASSED / [ ] FAILED